Skip to main content

Swagger\Client\PeeringApi

All URIs are relative to https://api.estuary.tech

MethodHTTP requestDescription
adminPeeringPeersDeleteDELETE /admin/peering/peersRemove peers on Peering Service
adminPeeringPeersGetGET /admin/peering/peersList all Peering peers
adminPeeringPeersPostPOST /admin/peering/peersAdd peers on Peering Service
adminPeeringStartPostPOST /admin/peering/startStart Peering
adminPeeringStatusGetGET /admin/peering/statusCheck Peering Status
adminPeeringStopPostPOST /admin/peering/stopStop Peering

adminPeeringPeersDelete

adminPeeringPeersDelete($body)

Remove peers on Peering Service

This endpoint can be used to remove a Peer from the Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');

// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\PeeringApi(
// If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
// This is optional, `GuzzleHttp\Client` will be used as default.
new GuzzleHttp\Client(),
$config
);
$body = array(new \Swagger\Client\Model\string[]()); // string[] | Peer ids

try {
$apiInstance->adminPeeringPeersDelete($body);
} catch (Exception $e) {
echo 'Exception when calling PeeringApi->adminPeeringPeersDelete: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
bodystring[]Peer ids

Return type

void (empty response body)

Authorization

bearerAuth

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringPeersGet

adminPeeringPeersGet()

List all Peering peers

This endpoint can be used to list all peers on Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');

// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\PeeringApi(
// If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
// This is optional, `GuzzleHttp\Client` will be used as default.
new GuzzleHttp\Client(),
$config
);

try {
$apiInstance->adminPeeringPeersGet();
} catch (Exception $e) {
echo 'Exception when calling PeeringApi->adminPeeringPeersGet: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

void (empty response body)

Authorization

bearerAuth

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringPeersPost

adminPeeringPeersPost()

Add peers on Peering Service

This endpoint can be used to add a Peer from the Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');

// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\PeeringApi(
// If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
// This is optional, `GuzzleHttp\Client` will be used as default.
new GuzzleHttp\Client(),
$config
);

try {
$apiInstance->adminPeeringPeersPost();
} catch (Exception $e) {
echo 'Exception when calling PeeringApi->adminPeeringPeersPost: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

void (empty response body)

Authorization

bearerAuth

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringStartPost

adminPeeringStartPost()

Start Peering

This endpoint can be used to start the Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');

// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\PeeringApi(
// If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
// This is optional, `GuzzleHttp\Client` will be used as default.
new GuzzleHttp\Client(),
$config
);

try {
$apiInstance->adminPeeringStartPost();
} catch (Exception $e) {
echo 'Exception when calling PeeringApi->adminPeeringStartPost: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

void (empty response body)

Authorization

bearerAuth

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringStatusGet

adminPeeringStatusGet()

Check Peering Status

This endpoint can be used to check the Peering status

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');

// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\PeeringApi(
// If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
// This is optional, `GuzzleHttp\Client` will be used as default.
new GuzzleHttp\Client(),
$config
);

try {
$apiInstance->adminPeeringStatusGet();
} catch (Exception $e) {
echo 'Exception when calling PeeringApi->adminPeeringStatusGet: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

void (empty response body)

Authorization

bearerAuth

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]

adminPeeringStopPost

adminPeeringStopPost()

Stop Peering

This endpoint can be used to stop the Peering Service

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');

// Configure API key authorization: bearerAuth
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Authorization', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKeyPrefix('Authorization', 'Bearer');

$apiInstance = new Swagger\Client\Api\PeeringApi(
// If you want use custom http client, pass your client which implements `GuzzleHttp\ClientInterface`.
// This is optional, `GuzzleHttp\Client` will be used as default.
new GuzzleHttp\Client(),
$config
);

try {
$apiInstance->adminPeeringStopPost();
} catch (Exception $e) {
echo 'Exception when calling PeeringApi->adminPeeringStopPost: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

void (empty response body)

Authorization

bearerAuth

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to README]